Printer Utility

This printer utility offers you the ability to connect to your printer and access the utilities & functions that help you configure it.
The available printer utility functions depend on the connected printer as specified in the Printer Connection.

Getting Started


Connection Settings

When you first start the printer utility, the printer connection wizard will be displayed on your screen. Future use of all the functions will be through these printer connection settings. Please configure the printer connection according to the environment of your printer.

  1. Choose the interface type and configure its connection port.
  2. When you have finished the configuration, click the 'Done' button, create a name for this new connection, and click 'Yes' to finish the Wizard.
For the detail, please refer to Creating the Printer Connection.

 

Description of the Printer Utility Window.

The Utility Functions list is shown in the central pane of the Printer Utility Window. The Utility Functions in the list that are available depend on the configuration for the connection. The function's operating window will be displayed when you click on an available function.

You can change the display language of the Printer Utility from the Select Language screen that appears when you select ‘Select Language’ in the Tool menu. Select the desired language from the list of supported languages and then click ‘Select’. The display language will change the next time the Printer Utility is started.
Also, if you select ‘Printer Utility Help’ from the ‘Help’ menu, a list of links to the help for each utility function appears. You can check the version of each of the utility functions from here.

When a function is selected, the name of the selected function is displayed after ‘Utility Functions >’ below the menu bar. If you click the link of ‘Utility Functions >’, the utility function list view is redisplayed.

You can use 'Current Connection' and 'Connection Manager' on the left side of the window to view the connection settings and to create a new connection or modify and delete connections.

In the Printer Utility Window, if some sentences cannot be fully displayed on screen, you can place the cursor over the sentences in question to read them in their entirety.

Back to Top

Detailed Usage


Creating the Printer Connection

Please follow the Printer Connection Wizard to create your printer connection according to the printer environment.
To start the Printer Connection Wizard, click 'Create New' from the 'Connection Manager' list on the left side of the window.

  1. From the interface selection list on the left side of the window, click the appropriate interface.
  2. The procedure to configure the port which was chosen at step 1 will depend on the selected interface type.
    Please configure the port as shown below.
    USB / Parallel
    1. When you connect a printer and turn it on, the Plug and Play feature automatically starts the installation of the printer driver and creates a printer queue.
    2. The printer queue for the selected printer model appears on the port configuration window.
      If you create a queue after the port configuration window has been opened, click the 'Refresh' button to display the new printer queue.
    3. Select a displayed printer queue.
      If multiple printer queues are displayed, select the appropriate one.


  3. When you have finished your configuration, click the 'Done' button at the bottom right. You will then be asked to create a name for this new connection.
  4. Click the 'Check' button to confirm the correct connection for your printer.

 

Current Connection

The current active printer connection is summarised in the Current Connection box. Your chosen printer model, emulation, interface type & port are displayed here.

Click ‘Check’ to check the communication with the printer using the Current Connection information. If the communication check is successful, the firmware information is displayed. If it fails, an error message is displayed.

When you click the 'change' link, the Printer Connection Wizard Window will be displayed. It allows you to change your settings. To change your Printer Connection Setting, please refer to Creating the Printer Connection.

 

Connection Manager

This feature allows you to choose, rename and delete your connection. You can also create a new connection.
The Current Connection shown under the Connection Manager is the current status that is selected from the drop-down listbox.

Rename

Choose the connection that you want to rename from the drop-down listbox, click the 'Rename' link and a dialogue window is displayed. Enter the new connection name and click the 'Ok' button.


Delete

Choose the connection that you want to delete from the drop-down listbox, click the 'Delete' link and a dialogue window is displayed. Confirm your intention to delete the connection and then Click the 'Ok' button.


Create New

Click 'Create New' to go into the Printer Connection Wizard window.
For further details, please refer toCreating the Printer Connection.


 

Back to Top

Legal Information

Copyright © 2014 Star Micronics Co., Ltd. All rights reserved.